Double Cone Rotary Vacuum Dryer for The Vacuum Drying and Mixing of Powder and Granular Materials in The Pharmaceutical, Food and Chemical Industries

                                            SZG series double cone rotary vacuum dryer

Technical Parameters of SZG Rotary Vacuum Dryer

SZG double cone vacuum dryer is a new type drying equipment which combines similar product technologies at both home and abroad. This rotary vacuum dryer possesses belt and chain two-stage elastic connection modes. With low center of gravity, this drying machine can operate smoothly. Heating medium and vacuum system adopt reliable mechanical seal or rotating joint, so as to avoid defects such as the regular packing seal is easy to leak. On this basis, we modify this double cone vacuum dryer. It not only embodies the humanized design concept but also meets the GMP standards.

Features of SZG Double Cone Vacuum Dryer 
1.  This rotary vacuum dryer has advanced design, simple internal structure, convenient to clean and easy to handle.
2.  The tubes of heating medium and vacuum system are built in the rack in order to prevent artificial damage and difficult clean.
3.  The outer wall and rack sealing plate adopt polishing treatment, and the inner container adopts mirror polishing treatment.
4.  The materials in the double cone vacuum dryer can be rotated due to the revolution of the machine, which can minimize material water content (≤0.5%).
5.  The materials will not stick to the wall of the container. With big drying rate and energy saving, this rotary vacuum dryer can uniformly and sufficiently dry the materials.
6.  Condenser and recycling tank are equipped for recovering organic solvent.
7.  Our double cone vacuum dryer has three types of heat source, including steam, hot water and conduction oil.
 

SZG series double cone rotary vacuum dryer for the double cone of the rotary tank, the tank in the vacuum state, to the jacket into the heat conduction oil or hot water for heating, heat through the tank wall and wet materials in contact. The water vapor or other gas evaporated after the wet material absorbed heat is pumped away through the vacuum exhaust pipe by the vacuum pump. Because the tank body is in a vacuum state, and the rotation of the tank body makes the material constantly up and down, inside and outside turning, so it speeds up the drying speed of the material, improves the drying rate, and achieves the purpose of uniform drying.
 

This machine is suitable for the vacuum drying and mixing of powder and granular materials in the pharmaceutical, food and chemical industries, and is especially suitable for drying by the following requirements.
1,Heat-sensitive materials that cannot accept high temperatures
2,Materials that need to recover solvents and toxic gases
3,Easy to oxidize, dangerous materials
4,Materials with requirements for crystalline form
5,Require residual volatile content of very low material


Recommend Products

Changzhou Kexiang Drying Equipment Co., Ltd. is located in Jiaoxi Town, Changzhou, the hometown of drying equipment. It is the leading manufacturer of drying equipment and vacuum dryer design and production. Various types of granulation, drying, mixing and other equipment have been developed into 28 categories, more than 200 specifications and varieties. The founder of the company has been committed to vibrating fluidized bed, drying equipment, vacuum dryer, hot air circulation oven for more than ten years, Development, production and operation of double cone rotary vacuum dryer. Manufacturers of hot-air circulation ovens attach great importance to science and technology, and have successively cooperated with medical design institutes, the Ministry of Chemical Industry, the Ministry of Chemical Industry and a number of scientific research institutions in Shanghai, Wuhan, Chongqing and other places to develop, and there is a new product market every year.
Kexiang Drying wholeheartedly cooperates with new and old customers, adheres to the business policy of "being trustworthy and enterprising", and takes customer satisfaction as the ultimate goal.

1. Q: What is your production lead time?
    A: Generally speaking, samples take 1-3 days and mass production takes 15-30 days, also depending on your requirements.

2. Q: What are your payment options?
    A: Alibaba Trade assurance, T/T , L/C, Western Union, Cash After sigh the contract pay the 30% deposit of total purchase price and pay the full amount before shipment.

3. Q: What is the warranty period for your products?
    A: We provide one-year warranty for the products.

4. Q: Are you a trading company or a manufacturer?
    A: We are manufacturer. Welcome to visit our factory and check our products.

If you have any other questions, don't hesitate to contact us!